Table of Contents Previous Next Index


PANEL_ssoProps

Configuring Single Sign-On

Configuring SSO is a process that includes installing and configuring the SonicWALL SSO Agent and configuring a SonicWALL security appliance running SonicOS Enhanced to use the SSO Agent. For an introduction to SonicWALL SSO, see “Single Sign-On Overview” section. The following sections describe how to configure SSO:

 
“Installing the SonicWALL SSO Agent” section
 
“Configuring the SonicWALL SSO Agent” section
 
“Adding a SonicWALL Security Appliance” section
 
“Editing Appliances in SonicWALL SSO Agent” section
 
“Deleting Appliances in SonicWALL SSO Agent” section
 
“Modifying Services in SonicWALL SSO Agent” section
 
“Configuring Your SonicWALL Security Appliance” section
 
“Advanced LDAP Configuration” section
 
“Configuring Firewall Access Rules” section
 
“Viewing User Status” section
 
“Configuring User Settings” section

Installing the SonicWALL SSO Agent

The SonicWALL SSO Agent is part of the SonicWALL Directory Connector. The SonicWALL SSO Agent must be installed on a workstation or server in the Windows domain that is accessible using VPN or IP. The SonicWALL SSO Agent must have access to your SonicWALL security appliance. To install the SonicWALL SSO Agent, perform the following steps:

Step 1
Locate the SonicWALL Directory Connector executable file and double click it. It may take several seconds for the InstallShield to prepare for the installation.
Step 2
On the Welcome page, click Next to continue.
Step 3
The License Agreement displays. Select I accept the terms in the license agreement and click Next to continue.

Step 4
On the Customer Information page, enter your name in the User Name field and your organization name in the Organization field. Select to install the application for Anyone who uses this computer (all users) or Only for me. Click Next to continue.

Step 5
Select the destination folder. To use the default folder, C:\Program Files\SonicWALL\DCON, click Next. To specify a custom location, click Browse, select the folder, and click Next.

Step 6
On the Custom Setup page, the installation icon is displayed by default next to the SonicWALL SSO Agent feature. Click Next.

Step 7
Click Install to install SSO Agent.
Step 8
To configure a common service account that the SSO Agent will use to log into a specified Windows domain, enter the username of an account with administrative privileges in the Username field, the password for the account in the Password field, and the domain name of the account in the Domain Name field. Click Next.
 
Note
This section can be configured at a later time. To skip this step and configure it later,
click Skip.

Step 9
Enter the IP address of your SonicWALL security appliance in the SonicWALL Appliance IP field. Type the port number for the same appliance in the SonicWALL Appliance Port field. Enter a shared key (a hexadecimal number from 1 to 16 digits in length) in the Shared Key field. Click Next to continue.
 
Note
This information can be configured at a later time. To skip this step and configure it later, leave the fields blank and click Next.

 

The SonicWALL SSO Agent installs. The status bar displays.

Step 10
When installation is complete, optionally check the Launch SonicWALL Directory Connector box to launch the SonicWALL Directory Connector, and click Finish.

If you checked the Launch SonicWALL Directory Connector box, the SonicWALL Directory Connector will display.

 

Configuring the SonicWALL SSO Agent

The SonicWALL SSO Agent communicates with workstations using NetAPI or WMI, which both provide information about users that are logged into a workstation, including domain users, local users, and Windows services. WMI is pre-installed on Windows Server 2003, Windows XP, Windows ME, and Windows 2000. For other Windows versions, visit www.microsoft.com to download WMI. Verify that WMI or NetAPI is installed prior to configuring the SonicWALL SSO Agent.

The .NET Framework 2.0 must installed prior to configuring the SonicWALL SSO Agent. The .NET Framework can be downloaded from Microsoft at www.microsoft.com.

To configure the communication properties of the SonicWALL SSO Agent, perform the following tasks:

Step 1
Launch the SonicWALL Configuration Tool by double-clicking the desktop shortcut or by navigating to Start > All Programs > SonicWALL > SonicWALL Directory Connector > SonicWALL Configuration Tool.

 
Note
If the IP address for a default SonicWALL security appliance was not configured, or if it was configured incorrectly, a pop up will display. Click Yes to use the default IP address (192.168.168.168) or click No to use the current configuration.

If you clicked Yes, the message Successfully restored the old configuration will display. Click OK.

If you clicked No, or if you clicked Yes but the default configuration is incorrect, the message SonicWALL SSO Agent service is not running. Please check the configuration and start the service. will display. Click OK.

If the message SonicWALL SSO Agent service is not running. Please check the configuration and start the service displays, the SSO Agent service will be disabled by default. To enable the service, expand the SonicWALL Directory Connector Configuration Tool in the left navigation panel by clicking the + icon, highlight the SonicWALL SSO Agent underneath it, and click the button.

 

Step 2
In the left-hand navigation panel, expand the SonicWALL Directory Connector Configuration Tool by clicking the + icon. Right click the SonicWALL SSO Agent and select Properties.

Step 3
From the Logging Level pull-down menu, select the level of events to be logged in the Windows Event Log. The default logging level is 1. Select one of the following levels:
 
Logging Level 0 - Only critical events are logged.
 
Logging Level 1 - Critical and significantly severe events are logged.
 
Logging Level 2 - All requests from the appliance are logged, using the debug level of severity.
 
Note
When Logging Level 2 is selected, the SSO Agent service will terminate if the Windows event log reaches its maximum capacity.

Step 4
In the Refresh Time field, enter the frequency, in seconds, that the SSO Agent will refresh user log in status. The default is 60 seconds.

Step 5
From the Query Source pull-down menu, select the protocol that the SSO Agent will use to communicate with workstations, either NETAPI or WMI.

 
Note
NetAPI will provide faster, though possibly slightly less accurate, performance. WMI will provide slower, though possibly more accurate, performance. WMI is pre-installed on Windows Server 2003, Windows XP, Windows Me, and Windows 2000. Both NetAPI and WMI can be manually downloaded and installed. NetAPI and WMI provide information about users that are logged into a workstation, including domain users, local users, and Windows services.
Step 6
In the Configuration File field, enter the path for the configuration file. The default path is
C:\Program Files\SonicWALL\DCON\SSO\CIAConfig.xml.

Step 7
Click Accept.
Step 8
Click OK.

Adding a SonicWALL Security Appliance

Use these instructions to manually add a SonicWALL security appliance if you did not add one during installation, or to add additional SonicWALL security appliances.
To add a SonicWALL security appliance, perform the following steps:

Step 1
Launch the SonicWALL SSO Agent Configurator.

Step 2
Expand the SonicWALL Directory Connector and SonicWALL SSO Agent trees in the left column by clicking the + button. Right click SonicWALL Appliances and select Add.

Step 3
Enter the appliance IP address for your SonicWALL security appliance in the Appliance IP field. Enter the port for the same appliance in the Appliance Port field. The default port is 2258. Give your appliance a friendly name in the Friendly Name field. Enter a shared key in the Shared Key field or click Generate Key to generate a shared key. When you are finished, click OK.

Your appliance will display in the left-hand navigation panel under the SonicWALL Appliances tree.

Editing Appliances in SonicWALL SSO Agent

You can edit all settings on SonicWALL security appliances previously added in SonicWALL SSO Agent, including IP address, port number, friendly name, and shared key. To edit a SonicWALL security appliance in SonicWALL SSO Agent, select the appliance from the left-hand navigation panel and click the edit icon above the left-hand navigation panel. You can also click the Edit tab at the bottom of the right-hand window.

Deleting Appliances in SonicWALL SSO Agent

To delete a SonicWALL security appliance you previously added in SonicWALL SSO Agent, select the appliance from the left-hand navigation panel and click the delete icon above the left-hand navigation panel.

Modifying Services in SonicWALL SSO Agent

You can start, stop, and pause SonicWALL SSO Agent services to SonicWALL security appliances. To pause services for an appliance, select the appliance from the left-hand navigation panel and click the pause button . To stop services for an appliance, select the appliance from the left-hand navigation panel and click the stop button . To resume services, click the start button .

 
Note
You may be prompted to restart services after making configuration changes to a SonicWALL security appliance in the SonicWALL SSO Agent. To restart services, press the stop button then press the start button.

Configuring Your SonicWALL Security Appliance

Your SonicWALL security appliance must be configured to use SonicWALL SSO Agent as the SSO method.

To configure your SonicWALL security appliance, perform the following steps:

Step 1
Login to your SonicWALL security appliance.
Step 2
Navigate to Users > Settings.
Step 3
In the Single-sign-on method drop-down menu, select SonicWALL SSO Agent.
Step 4
Click Configure.The Authentication Agent Settings page displays.
Step 5
In the Name or IP Address field, enter the name or IP address of the workstation on which SonicWALL SSO Agent is installed.
Step 6
In Port Number, enter the port number of the workstation on which SonicWALL SSO Agent is installed. The default port is 2258.
Step 7
In the Shared Key field, enter the shared key that you created or generated in the SonicWALL SSO Agent. The shared key must match exactly. Re-enter the shared key in the Confirm Shared Key field.
Step 8
In the Timeout (seconds) field, enter a number of seconds before the authentication attempt times out.
Step 9
In the Retries field, enter the number of authentication attempts.
Step 10
Click the Users tab. The User Settings page displays.
Step 11
Check the box next to Allow only users listed locally to allow only users listed locally to be authenticated.
Step 12
Check the box next to Simple user names in local database to use simple user names. This setting ignores the domain component of a user name. If this box is not checked, user names in the local database must match exactly the full names returned from the agent, including the domain component.
Step 13
Check the box next to Allow limited access for non-domain users to allow limited access to users who are logged in to a computer but not into a domain. These users will not be given access to the Trusted Users user group. They are identified in logs as computer-name/user-name. When performing local authentication and the Simple user names in local database option is disabled, user names must be configured in the local database using the full computer-name/user-name identification.
Step 14
To use LDAP to retrieve user information, select the Use LDAP to retrieve user group information radio button. Click Configure to configure the LDAP settings. The LDAP Configuration page displays. For configuration information for this page, refer to “Advanced LDAP Configuration” section.
Step 15
To use local configuration, select the Local configuration radio button.
Step 16
In the Polling rate (minutes) field, enter a polling interval, in minutes, that the security appliance will poll the workstation running SSO Agent to verify that users are still logged on.
Step 17
In the Hold time after (minutes) field, enter a time, in minutes, that the security appliance will wait before trying again to identify traffic after an initial failure to do so. This feature rate-limits requests to the agent.
Step 18
Click on the Content Filter tab if you are using the SonicWALL Content Filtering Service (CFS) and there is a proxy server in your network.
 
Note
The Content Filter tab is only displayed if Premium CFS is enabled on the SonicWALL security appliance.
Step 19
To bypass SSO for content filtering traffic and apply the default content filtering policy to the traffic, select the appropriate address object or address group from the pulldown menu.

This setting should be used where traffic that would be subject to content filtering can emanate from a device other than a user's workstation (such as an internal proxy Web server). It prevents the SonicWALL from attempting to identify such a device as a network user in order to select the content filtering policy to apply. The default content filtering policy will be used for all traffic from the selected IP addresses.

 
Note
By default, Linux and Mac users who are not authenticated by SSO are assigned the default content filtering policy. To redirect all such users who are not authenticated by SSO to manually enter their credentials, create an access rule from the WAN zone to the LAN zone for the HTTP service with Users Allowed set to All. Then configure the appropriate CFS policy for the users or user groups. See “Adding Access Rules” section for more information on configuring access rules.
Step 20
Click the Test tab. The Test Authentication Agent Settings page displays.
Step 21
Select the Check agent connectivity radio button then click the Test button. This will test communication with the authentication agent. If the SonicWALL security appliance can connect to the agent, you will see the message Agent is ready.
Step 22
Select the Check user radio button, enter the IP address of a workstation in the Workstation IP address field, then click Test. This will test if the agent is property configured to identify the user logged into a workstation.
 
Note
Performing tests on this page applies any changes that have been made.

 
Tip
If you receive the messages Agent is not responding or Configuration error, check your settings and perform these tests again.

Step 23
When you are finished, click OK.

Advanced LDAP Configuration

If you selected Use LDAP to retrieve user group information in step 14 of “Configuring Your SonicWALL Security Appliance” section, you must configure your LDAP settings. To configure LDAP settings, perform the following steps:

Step 1
The Settings tab displays. In the Name or IP address field, enter the name or IP address of your LDAP server.
Step 2
In the Port Number field, enter the port number of your LDAP server. The default port is 636.
Step 3
In the Server timeout (seconds) field, enter a number of seconds the SonicWALL security appliance will wait for a response from the LDAP server before the attempt times out. Allowable values are 1 to 99999. The default is 10 seconds.
Step 4
Check the Anonymous login box to login anonymously. Some LDAP servers allow for the tree to be accessed anonymously. If your server supports this (MS AD generally does not), you may select this option.
Step 5
To login with a user’s name and password, enter the user’s name in the Login user name field and the password in the Login password field. The login name will automatically be presented to the LDAP server in full ‘dn’ notation.
 
Note
Use the user’s name in the Login user name field, not a username or login ID. For example, John Doe would login as John Doe, not jdoe.
Step 6
Select the LDAP version from the Protocol version drop-down menu, either LDAP version 2 I (LDAPv2) or LDAP version 3 (LDAPv3). Most implementations of LDAP, including AD, employ LDAPv3.
Step 7
Check the Use TLS (SSL) box to use Transport Layer Security (SSL) to login to the LDAP server. It is strongly recommended to use TLS to protect the username and password information that will be sent across the network. Most implementations of LDAP server, including AD, support TLS.
Step 8
Check the Send LDAP ‘Start TLS’ request to allow the LDAP server to operate in TLS and non-TLS mode on the same TCP port. Some LDAP server implementations support the Start TLS directive rather than using native LDAP over TLS. This allows the LDAP server to listen on one port (normally 389) for LDAP connections, and to switch to TLS as directed by the client. AD does not use this option, and it should only be selected if required by your LDAP server.
 
Note
Only check the Send LDAP ‘Start TLS’ request box if your LDAP server uses the same port number for TLS and non-TLS.
Step 9
Check the Require valid certificate from server to require a valid certificate from the server. Validates the certificate presented by the server during the TLS exchange, matching the name specified above to the name on the certificate. Deselecting this default option will present an alert, but exchanges between the SonicWALL security appliance and the LDAP server will still use TLS – only without issuance validation.
Step 10
Select a local certificate from the Local certificate for TLS drop-down menu. This is optional, to be used only if the LDAP server requires a client certificate for connections. This feature is useful for LDAP server implementations that return passwords to ensure the identity of the LDAP client (AD does not return passwords). This setting is not required for AD.
Step 11
Click Accept.
Step 12
Click the Schema tab.
Step 13
From the LDAP Schema pull-down menu, select one of the following LDAP schemas. Selecting any of the predefined schemas will automatically populate the fields used by that schema with their correct values. Selecting ‘user-defined’ will allow you to specify your own values – use this only if you have a specific or proprietary LDAP schema configuration.
 
Microsoft Active Directory
 
RFC2798 InetOrgPerson
 
RFC2307 Network Information Service
 
Samba SMB
 
Novell eDirectory
 
User defined
Step 14
The Object class field defines which attribute represents the individual user account to which the next two fields apply. This will not be modifiable unless you select User defined.
Step 15
The Login name attribute field defines which attribute is used for login authentication. This will not be modifiable unless you select User defined.
Step 16
If the Qualified login name attribute field is not empty, it specifies an attribute of a user object that sets an alternative login name for the user in name@domain format. This may be needed with multiple domains in particular, where the simple login name may not be unique across domains. This is set to mail for Microsoft Active Directory and RFC2798 inetOrgPerson.
Step 17
The User group membership attribute field contains the information in the user object of which groups it belongs to. This is memberOf in Microsoft Active Directory. The other predefined schemas store group membership information in the group object rather than the user object, and therefore do not use this field.
Step 18
The Framed IP address attribute field can be used to retrieve a static IP address that is assigned to a user in the directory. Currently it is only used for a user connecting using L2TP with the SonicWALL security appliance L2TP server. In future releases, this may also be supported for the SonicWALL Global VPN Client (GVC). In Active Director, the static IP address is configured on the Dial-in tab of a user’s properties.
Step 19
The Object class field defines the type of entries that an LDAP directory may contain. A sample object class, as used by AD, would be ‘user’ or ‘group’.
Step 20
The Member attribute field defines which attribute is used for login authentication.
Step 21
Select the Directory tab.
Step 22
In the Primary Domain field, specify the user domain used by your LDAP implementation. For AD, this will be the Active Directory domain name, such as yourADdomain.com. Changes to this field will, optionally, automatically update the tree information in the rest of the page. This is set to mydomain.com by default for all schemas except Novell eDirectory, for which it is set to o=mydomain.
Step 23
In the User tree for login to server field, specify the tree in which the user specified in the ‘Settings’ tab resides. For example, in AD the ‘administrator’ account’s default tree is the same as the user tree.
Step 24
In the Trees containing users field, specify the trees where users commonly reside in the LDAP directory. One default value is provided that can be edited, a maximum of 64 DN values may be provided, and the SonicWALL security appliance searches the directory until a match is found, or the list is exhausted. If you have created other user containers within your LDAP or AD directory, you should specify them here.
Step 25
In the Trees containing user groups specify the trees where user groups commonly reside in the LDAP directory. A maximum of 32 DN values may be provided. These are only applicable when there is no user group membership attribute in the schema's user object, and are not used with AD.

The above-mentioned trees are normally given in URL format but can alternatively be specified as distinguished names (for example, “myDom.com/Sales/Users” could alternatively be given as the DN “ou=Users,ou=Sales,dc=myDom,dc=com”). The latter form will be necessary if the DN does not conform to the normal formatting rules as per that example. In Active Directory the URL corresponding to the distinguished name for a tree is displayed on the Object tab in the properties of the container at the top of the tree.

 
Note
AD has some built-in containers that do not conform (for example, the DN for the top level Users container is formatted as “cn=Users,dc=…”, using ‘cn’ rather than ‘ou’) but the SonicWALL knows about and deals with these, so they can be entered in the simpler URL format.

Ordering is not critical, but since they are searched in the given order it is most efficient to place the most commonly used trees first in each list. If referrals between multiple LDAP servers are to be used, then the trees are best ordered with those on the primary server first, and the rest in the same order that they will be referred.

 
Note
When working with AD, to locate the location of a user in the directory for the ‘User tree for login to server’ field, the directory can be searched manually from the Active Directory Users and Settings control panel applet on the server, or a directory search utility such as queryad.vbs in the Windows NT/2000/XP Resource Kit can be run from any PC in the domain.
Step 26
The Auto-configure button causes the SonicWALL security appliance to auto-configure the ‘Trees containing users’ and ‘Trees containing user groups’ fields by scanning through the directory/directories looking for all trees that contain user objects. The ‘User tree for login to server’ must first be set.

Select whether to append new located trees to the current configuration, or to start from scratch removing all currently configured trees first, and then click OK. Note that it will quite likely locate trees that are not needed for user login and manually removing such entries is recommended.

If using multiple LDAP/AD servers with referrals, this process can be repeated for each, replacing the ‘Domain to search’ accordingly and selecting ‘Append to existing trees’ on each subsequent run.

Step 27
Select the LDAP Users tab.
Step 28
Check the Allow only users listed locally box to require that LDAP users also be present in the SonicWALL security appliance local user database for logins to be allowed.
Step 29
Check the User group membership can be set locally by duplicating LDAP user names box to allow for group membership (and privileges) to be determined by the intersection of local user and LDAP user configurations.
Step 30
From the Default LDAP User Group pull-down menu, select a default group on the SonicWALL security appliance to which LDAP users will belong in addition to group memberships configured on the LDAP server.

 
Tip
Group memberships (and privileges) can also be assigned simply with LDAP. By creating user groups on the LDAP/AD server with the same name as SonicWALL security appliance built-in groups (such as Guest Services, Content Filtering Bypass, Limited Administrators) and assigning users to these groups in the directory, or creating user groups on the SonicWALL security appliance with the same name as existing LDAP/AD user groups, SonicWALL group memberships will be granted upon successful LDAP authentication.

The SonicWALL security appliance can retrieve group memberships more efficiently in the case of Active Directory by taking advantage of its unique trait of returning a ‘memberOf’ attribute for a user.

Step 31
Click the Import user groups button to import user groups from the LDAP server. The names of user groups on the LDAP server need to be duplicated on the SonicWALL if they are to be used in policy rules, CFS policies, etc.
Step 32
Select the LDAP Relay tab.

 

Step 33
Check the Enable RADIUS to LDAP Relay box to enable RADIUS to LDAP relay. The RADIUS to LDAP Relay feature is designed for use in a topology where there is a central site with an LDAP/AD server and a central SonicWALL security appliance with remote satellite sites connected into it using SonicWALL security appliances that may not support LDAP. In that case the central SonicWALL security appliance can operate as a RADIUS server for the remote SonicWALL security appliances, acting as a gateway between RADIUS and LDAP, and relaying authentication requests from them to the LDAP server.

Additionally, for remote SonicWALL security appliances running non-enhanced firmware, with this feature the central SonicWALL security appliance can return legacy user privilege information to them based on user group memberships learned using LDAP. This avoids what can be very complex configuration of an external RADIUS server such as IAS for those SonicWALL security appliances.

Step 34
Under Allow RADIUS clients to connect via, check the relevant checkboxes and policy rules will be added to allow incoming RADIUS requests accordingly. The options are:
 
Trusted Zones
 
WAN Zone
 
Public Zones
 
Wireless Zones
 
VPN Zone
Step 35
In the RADIUS shared secret field, enter a shared secret common to all remote SonicWALL security appliances.
Step 36
In the User groups for legacy users fields, define the user groups that correspond to the legacy ‘VPN users,’ ‘VPN client users,’ ‘L2TP users’ and ‘users with Internet access’ privileges. When a user in one of the given user groups is authenticated, the remote SonicWALL security appliances will be informed that the user is to be given the relevant privilege.
 
Note
The ‘Bypass filters’ and ‘Limited management capabilities’ privileges are returned based on membership to user groups named ‘Content Filtering Bypass’ and ‘Limited Administrators’ – these are not configurable.
Step 37
Select the Test tab.

 

The ‘Test’ page allows for the configured LDAP settings to be tested by attempting authentication with specified user and password credentials. Any user group memberships and/or framed IP address configured on the LDAP/AD server for the user will be displayed.

Step 38
In the Username and Password fields, enter a valid LDAP login name for the LDAP server you configured.
Step 39
Select Password authentication or CHAP (Challenge Handshake Authentication Protocol).
 
Note
CHAP only works with a server that supports retrieving user passwords using LDAP and in some cases requires that the LDAP server to be configured to store passwords reversibly. CHAP cannot be used with Active Directory.
Step 40
Click Test.

Configuring Firewall Access Rules

Firewall access rules provide the administrator with the ability to control user access. Rules set under Firewall > Access Rules are checked against the user group memberships returned from a SSO LDAP query, and are applied automatically. Access rules are network management tools that allow you to define inbound and outbound access policy, configure user authentication, and enable remote management of the SonicWALL security appliance. The SonicOS Firewall > Access Rules page provides a sortable access rule management interface. The subsequent sections provide high-level overviews on configuring access rules by zones and configuring bandwidth management using access rules.

 
Note
More specific policy rules should be given higher priority than general policy rules. The general specificity hierarchy is source, destination, service. User identification elements, for example, user name and corresponding group permissions, are not included in defining the specificity of a policy rule.

By default, SonicWALL security appliance’s stateful packet inspection allows all communication from the LAN to the Internet, and blocks all traffic to the LAN from the Internet.

Additional network access rules can be defined to extend or override the default access rules. For example, access rules can be created that block certain types of traffic such as IRC from the LAN to the WAN, or allow certain types of traffic, such as Lotus Notes database synchronization, from specific hosts on the Internet to specific hosts on the LAN, or restrict use of certain protocols such as Telnet to authorized users on the LAN.

 
Note
The ability to define network access rules is a powerful tool. Using custom access rules can disable firewall protection or block all access to the Internet. Use caution when creating or deleting network access rules.

For detailed information about access rules, see Firewall > Access Rules.

Viewing User Status

The Users > Status page displays Active User Sessions on the SonicWALL security appliance. The table lists User Name, IP Address, Session Time, Time Remaining, Inactivity Remaining, Settings, and Logout. For users authenticated using SonicWALL SSO Agent, the message Auth. by SSO Agent will display. To logout a user, click the delete icon next to the user’s entry.

 
Note
Changes in a user’s settings, configured under Users > Settings, will not be reflected during that user’s current session; you must manually log the user out for changes to take effect. The user will be transparently logged in again, with the changes reflected.

Configuring User Settings

The Users > Settings page provides the administrator with configuration options for user session settings, global user settings, and acceptable use policy settings, in addition to SSO and other user login settings.

The Enable login session limit and corresponding Login session limit (minutes) settings under User Session Settings apply to users logged in using SSO. SSO users will be logged out according to session limit settings, but will be automatically and transparently logged back in when they send further traffic.

 
Note
Do not set the login session limit interval too low. This could potentially cause performance problems, especially for deployments with many users.

Changes applied in the Users > Setting s page during an active SSO session will not be reflected during that session.

 
Tip
You must log the user out for changes to take effect. The user will immediately and automatically be logged in again, with the changes made.

Configuring Multiple Administrator Support

This section contains the following subsections:

 
“Configuring Additional Administrator User Profiles” section
 
“Configuring Administrators Locally when Using LDAP or RADIUS” section
 
“Preempting Administrators” section
 
“Activating Configuration Mode” section
 
“Verifying Multiple Administrators Support Configuration” section
 
“Viewing Multiple Administrator Related Log Messages” section

Configuring Additional Administrator User Profiles

To configure additional administrator user profiles, perform the following steps:

Step 1
While logged in as admin, navigate to the Users > Local Users page.
Step 2
Click the Add User button.
Step 3
Enter a Name and Password for the user.
Step 4
Click on the Group Membership tab.
Step 5
Select the appropriate group to give the user Administrator privileges:
 
Limited Administrators - The user has limited administrator configuration privileges.
 
SonicWALL Administrators - The user has full administrator configuration privileges.
 
SonicWALL Read-Only Admins - The user can view the entire management interface, but cannot make any changes to the configuration.
Step 6
Click the right arrow button and click OK.
Step 7
To configure the multiple administrator feature such that administrators are logged out when they are preempted, navigate to the System > Administration page.
Step 8
Select the Log out radio button for the On preemption by another administrator option and click Accept.

Configuring Administrators Locally when Using LDAP or RADIUS

When using RADIUS or LDAP authentication, if you want to ensure that some or all administrative users will always be able to manage the appliance, even if the RADIUS or LDAP server becomes unreachable, then you can use the RADIUS + Local Users or LDAP + Local Users option and configure the accounts for those particular users locally.

For users authenticated by RADIUS or LDAP, create user groups named SonicWALL Administrators and/or SonicWALL Read-Only Admins on the RADIUS or LDAP server (or its back-end) and assign the relevant users to those groups. Note that in the case of RADIUS you will probably need special configuration of the RADIUS server to return the user group information – see the SonicWALL RADIUS documentation for details.

When using RADIUS or LDAP authentication, if you want to keep the configuration of administrative users local to the appliance whilst having those users authenticated by RADIUS/LDAP, perform these steps:

Step 1
Navigate to the Users > Settings page.
Step 2
Select either the RADIUS + Local Users or LDAP + Local Users authentication method.
Step 3
Click the Configure button.
Step 4
For RADIUS, click on the RADIUS Users tab and select the Local configuration only radio button and ensure that the Memberships can be set locally by duplicating RADIUS user names checkbox is checked.
Step 5
For LDAP, click on the LDAP Users tab and select the User group membership can be set locally by duplicating LDAP user names checkbox.
Step 6
Then create local user accounts with the user names of the administrative users (note no passwords need be set here) and add them to the relevant administrator user groups.

Preempting Administrators

When an administrator attempts to log in while another administrator is logged in, the following message is displayed. The message displays the current administrator’s user name, IP address, phone number (if it can be retrieved from LDAP), and whether the administrator is logged in using the GUI or CLI.

This window gives you three options:

 
Continue - Preempts the current administrator. The current administrator is dropped to non-config mode and you are given full administrator access.
 
Non-config - You are logged into the appliance in non-config mode. The current administrator’s session is not disturbed.
 
Cancel - Returns to the authentication screen.

Activating Configuration Mode

When logging in as a user with administrator rights (that is not the admin user), the User Login Status popup window is displayed.

To go to the SonicWALL user interface, click the Manage button. You will be prompted to enter your password again. This is a safeguard to protect against unauthorized access when administrators are away from their computers and do not log out of their session.

Disabling the User Login Status Popup

You can disable the User Login Status popup window if you prefer to allow certain users to log in solely for the purpose of managing the appliance, rather than for privileged access through the appliance. To disable the popup window, select the Members go straight to the management UI on web login checkbox when adding or editing the local group.

If you want some user accounts to be administrative only, while other users need to log in for privileged access through the appliance, but also with the ability to administer it (that is, some go straight to the management interface on login, while others get the User Login Status popup window with a Manage button), this can be achieved as follows:

Step 1
Create a local group with the Members go straight to the management UI on web login checkbox selected.
Step 2
Add the group to the relevant administrative group, but do not select this checkbox in the administrative group.
Step 3
Add those user accounts that are to be administrative-only to the new user group. The User Login Status popup window is disabled for these users.
Step 4
Add the user accounts that are to have privileged and administrative access directly to the top-level administrative group.

To switch from non-config mode to full configuration mode, perform the following steps:

Step 1
Navigate to the System > Administration page.
Step 2
In the Web Management Settings section, click on the Configuration mode button. If there is not currently an administrator in configuration mode, you will automatically be entered into configuration mode.
Step 3
If another administrator is in configuration mode, the following message displays.
Step 4
Click the Continue button to enter configuration mode. The current administrator is converted to read-only mode and you are given full administrator access.

Verifying Multiple Administrators Support Configuration

User accounts with administrator and read-only administrators can be viewed on the Users > Local Groups page.

Administrators can determine which configuration mode they are in by looking at either the top right corner of the management interface or at the status bar of their browser.

To display the status bar in Firefox and Internet Explorer, click on the View menu and enable status bar. By default, Internet Explorer 7.0 and Firefox 2.0 do not allow Web pages to display text in the status bar. To allow status bar messages in Internet Explorer, go to Tools > Internet Options, select the Security tab, click on the Custom Level button, scroll to the bottom of the list, and select Enable for Allow Status Bar Updates Via Script.

To allow status bar messages in Firefox, go to Tools > Options, select the Content tab, click the Advanced button, and select the checkbox for Change Status Bar Text in the pop-up window that displays.

When the administrator is in full configuration mode, no message is displayed in the top right corner and the status bar displays Done.

When the administrator is in read-only mode, the top right corner of the interface displays Read-Only Mode.

The status bar displays Read-only mode - no changes can be made.

When the administrator is in non-config mode, the top right of the interface displays Non-Config Mode. Clicking on this text links to the System > Administration page where you can enter full configuration mode.

The status bar displays Non-config mode - configuration changes not allowed.

Viewing Multiple Administrator Related Log Messages

Log messages are generated for the following events:

 
A GUI or CLI user begins configuration mode (including when an admin logs in).
 
A GUI or CLI user ends configuration mode (including when an admin logs out).
 
A GUI user begins management in non-config mode (including when an admin logs in and when a user in configuration mode is preempted and dropped back to read-only mode).
 
A GUI user begins management in read-only mode.

A GUI user terminates either of the above management sessions (including when an admin logs out).


Table of Contents Previous Next Index